Buy or sell pallets near Mc Kinney, Texas ZIP 75071 - new, used, custom, ISPM-15 export, with sub-2-hour quote response.
Get a Price →Buy or sell pallets near Mc Kinney, Texas ZIP 75071 - new, used, custom, ISPM-15 export, with sub-2-hour quote response.
USP serves Mc Kinney, Texas (75071, Collin County) for both buying and selling pallets. Whether you need new GMA 48x40, used Grade A/B/C, custom-engineered, ISPM-15 export, or wooden crates - or you want to sell used pallets through our buy-back program - USP is your local pallet partner with sub-2-hour quote response and same-week service.
| Pallet Type | Spot Pricing |
|---|---|
| New GMA 48x40 stringer | $11-18 |
| New GMA 48x40 block | $18-28 |
| Used Grade A | $7-11 |
| Used Grade B | $4-7 |
| Used Grade C | $2-4 |
| Custom engineered | $20-200+ |
| Wooden crates | $50-3,000+ |
| ISPM-15 stamping (add) | +$0.85-1.10 |
| NWPCA Grade | Buy-Back Rate |
|---|---|
| Grade A | $3-6 per pallet |
| Grade B | $1-3 per pallet |
| Grade C | $0-1 per pallet |
| Scrap | Free pickup |
50 pallets per order minimum on buy-side. Sell-side (buyback) minimum is 250 pallets per single-size load. Volume tiers kick in automatically as cumulative monthly volume increases - 500+/week accounts qualify for standing-order programs with reserved delivery slots.
Yes. Backhaul logistics are coordinated on outbound delivery routes - empty or non-spec pallets get picked up on the return leg of new pallet deliveries. Per-pallet freight cost on the backhaul approaches zero for accounts running both new-pallet purchase + buyback simultaneously.
Yes. We deliver to every commercial address in Texas, with same-day shipping standard in our Southeast/Mid-Atlantic core and scheduled weekly delivery elsewhere. Mc Kinney-area accounts are typical - submit a quote with your dock location and we route accordingly.
Same-day shipping in our Southeast/Mid-Atlantic core (FL, GA, AL, TN, MS, SC, NC, KY, VA) and scheduled weekly delivery elsewhere. Express options available for Mc Kinney rush orders. Quote response under 2 business hours, dispatch within hours of order confirmation.
Yes, with ISPM-15 heat-treated pallets carrying IPPC stamps and full ISPM-15 documentation. Required for international shipments to all WTO member countries. Common for Mc Kinney customers with port access via Texas's major export gateways.
Sub-2-hour response.
All pallets stamped IPPC HT for ISPM-15 export compliance to 180+ countries; documentation includes treatment temperature logs and the registered facility number.
Eagle Ford Shale and Permian frac-sand operations require sand-resistant pallet treatment; we supply chemically resistant heat-treated stock that withstands abrasive frac-sand loading cycles.
Port of Houston Authority requires ISPM-15 stamp verification at Bayport Terminal and Barbours Cut; we coordinate with longshore inspectors for full-load certification, eliminating dock-delay risk.
Deck board edge type defaults to chamfered for forklift safety; square-edge available on request for ASRS compatibility; rounded-edge banding tracks available for high-throughput line-side delivery.
Block pallets (four-way entry) use nine 4-inch hardwood blocks with continuous-face top deck; ideal for ASRS (automated storage and retrieval) and AGV (automated guided vehicle) operations where stringer interruptions cause read-failures.
Same-day delivery available within 75 miles of our Tampa, Orlando, Jacksonville, Miami, and Lakeland yards; minimum 24 pallets; small-order pricing applies on freight.
Concrete and aggregate suppliers use bagged-goods stringers (heavier construction, denser nail pattern) to support 4,000+ lb cement-sack loads; we stock these in our Tampa Bay and Jacksonville warehouses.
Delivery freight runs $250-450 per truckload (53-foot) within 75 miles of a yard; longer hauls priced at $2.50-3.50 per loaded mile; flatbed loads premium 10-15%.
Lumber sourcing prioritizes regional Southeast US hardwood mills (FL, AL, GA, MS); reduces transport carbon vs Pacific Northwest stock; supports regional logging economies.