ISO standard pallets in Carrollton, Texas ZIP 75011: 1200x1000mm, 1140x1140mm, 1100x1100mm. Per ISO 6780. Custom engineered, ISPM-15 ready.
Get a Price →ISO standard pallets in Carrollton, Texas ZIP 75011: 1200x1000mm, 1140x1140mm, 1100x1100mm. Per ISO 6780. Custom engineered, ISPM-15 ready.
USP supplies ISO 6780 standard pallets to Carrollton, Texas (75011, Dallas County) buyers for international shipping. Standard ISO sizes: 1200x1000mm (most common globally), 1140x1140mm (Australasian), 1100x1100mm (Asian), 1219x1016mm (US GMA equivalent). Custom-engineered to ISO 18613 management standard with NWPCA Uniform Standard grading, ASTM D1185 load ratings, ALSC-accredited ISPM-15 heat treatment for international export. Per-pallet pricing varies by dimension and lumber.
| Pallet Type | Carrollton Spot Range |
|---|---|
| New GMA 48x40 stringer | $11-18 |
| New GMA 48x40 block | $18-28 |
| Recycled Grade A | $7-11 |
| Custom engineered | $20-200+ |
| Wooden crates | $50-3,000+ |
| ISPM-15 stamping (add) | +$0.85-1.10 |
Yes. Backhaul logistics are coordinated on outbound delivery routes - empty or non-spec pallets get picked up on the return leg of new pallet deliveries. Per-pallet freight cost on the backhaul approaches zero for accounts running both new-pallet purchase + buyback simultaneously.
Net-30 credit terms standard after the first 1-3 prepaid or COD loads while credit is being established. Submit a credit application with three trade references; approval typically processes within 48 hours. Volume accounts can negotiate net-45 or net-60.
Yes, with ISPM-15 heat-treated pallets carrying IPPC stamps and full ISPM-15 documentation. Required for international shipments to all WTO member countries. Common for Carrollton customers with port access via Texas's major export gateways.
50 pallets per order minimum on buy-side. Sell-side (buyback) minimum is 250 pallets per single-size load. Volume tiers kick in automatically as cumulative monthly volume increases - 500+/week accounts qualify for standing-order programs with reserved delivery slots.
Yes. We deliver to every commercial address in Texas, with same-day shipping standard in our Southeast/Mid-Atlantic core and scheduled weekly delivery elsewhere. Carrollton-area accounts are typical - submit a quote with your dock location and we route accordingly.
Sub-2-hour response.
Kiln-dried hardwood meets NWPCA Uniform Standard for Wood Pallets; moisture content verified <19% at dispatch, blade-cut deck boards, no visible bark.
Texas Department of Agriculture (TDA) pest-quarantine rules require ISPM-15 documentation on pallets shipped from quarantined zones (cotton boll weevil, fire ant); our Texas yards maintain TDA registration for compliant export.
Port of Houston Authority requires ISPM-15 stamp verification at Bayport Terminal and Barbours Cut; we coordinate with longshore inspectors for full-load certification, eliminating dock-delay risk.
48x40 GMA load capacity is 2,800 lb racked (face-loaded), 4,600 lb static, and 2,500 lb dynamic per ASME MH1 2016; deck board span 3.5 inches; deflection under rated load <0.5 inch.
Lumber spec for new GMA stock: mixed hardwood (oak, maple, ash, hickory) with minimum 600 SG (specific gravity); kiln dried to <19% moisture; visible defects limited to wane on outer 1/3 of deck board only.
Dry-van loads handle weather-sensitive pallet stock and food-grade freight; sealed loads with bill-of-lading documentation; supports DOT-required commercial routing.
Furniture manufacturers in High Point NC (and southeast suppliers shipping to FL) use custom oversized pallets for assembled freight; 60x40 and 72x48 builds available on 5-day production lead time.
Delivery freight runs $250-450 per truckload (53-foot) within 75 miles of a yard; longer hauls priced at $2.50-3.50 per loaded mile; flatbed loads premium 10-15%.
Lumber sourcing prioritizes regional Southeast US hardwood mills (FL, AL, GA, MS); reduces transport carbon vs Pacific Northwest stock; supports regional logging economies.