ISO standard pallets in Lewisville, Texas ZIP 75057: 1200x1000mm, 1140x1140mm, 1100x1100mm. Per ISO 6780. Custom engineered, ISPM-15 ready.
Get a Price →ISO standard pallets in Lewisville, Texas ZIP 75057: 1200x1000mm, 1140x1140mm, 1100x1100mm. Per ISO 6780. Custom engineered, ISPM-15 ready.
USP supplies ISO 6780 standard pallets to Lewisville, Texas (75057, Denton County) buyers for international shipping. Standard ISO sizes: 1200x1000mm (most common globally), 1140x1140mm (Australasian), 1100x1100mm (Asian), 1219x1016mm (US GMA equivalent). Custom-engineered to ISO 18613 management standard with NWPCA Uniform Standard grading, ASTM D1185 load ratings, ALSC-accredited ISPM-15 heat treatment for international export. Per-pallet pricing varies by dimension and lumber.
| Pallet Type | Lewisville Spot Range |
|---|---|
| New GMA 48x40 stringer | $11-18 |
| New GMA 48x40 block | $18-28 |
| Recycled Grade A | $7-11 |
| Custom engineered | $20-200+ |
| Wooden crates | $50-3,000+ |
| ISPM-15 stamping (add) | +$0.85-1.10 |
Yes. Backhaul logistics are coordinated on outbound delivery routes - empty or non-spec pallets get picked up on the return leg of new pallet deliveries. Per-pallet freight cost on the backhaul approaches zero for accounts running both new-pallet purchase + buyback simultaneously.
Yes. We buy back used pallets from Lewisville collectors, recyclers, and warehouses - 250-pallet minimum per load, single-size only (no mixed-size loads). Fast ACH payment, typically same-day or net-7 depending on volume. Pickup arranged on standard outbound delivery routes.
Yes, with ISPM-15 heat-treated pallets carrying IPPC stamps and full ISPM-15 documentation. Required for international shipments to all WTO member countries. Common for Lewisville customers with port access via Texas's major export gateways.
Yes. We deliver to every commercial address in Texas, with same-day shipping standard in our Southeast/Mid-Atlantic core and scheduled weekly delivery elsewhere. Lewisville-area accounts are typical - submit a quote with your dock location and we route accordingly.
Net-30 credit terms standard after the first 1-3 prepaid or COD loads while credit is being established. Submit a credit application with three trade references; approval typically processes within 48 hours. Volume accounts can negotiate net-45 or net-60.
Sub-2-hour response.
GMA 48x40 four-way stringer construction conforms to the National Wooden Pallet & Container Association (NWPCA) 2014 Uniform Standard; deck board configuration 7-board top, 5-board bottom.
Eagle Ford Shale and Permian frac-sand operations require sand-resistant pallet treatment; we supply chemically resistant heat-treated stock that withstands abrasive frac-sand loading cycles.
Permian Basin oilfield logistics in Midland and Odessa require heavy-duty pallets rated for 5,000+ lb crane lifts; we supply reinforced 48x40 stock with continuous-face deck and double-runner stringers.
Block pallets (four-way entry) use nine 4-inch hardwood blocks with continuous-face top deck; ideal for ASRS (automated storage and retrieval) and AGV (automated guided vehicle) operations where stringer interruptions cause read-failures.
Lumber spec for new GMA stock: mixed hardwood (oak, maple, ash, hickory) with minimum 600 SG (specific gravity); kiln dried to <19% moisture; visible defects limited to wane on outer 1/3 of deck board only.
Same-day delivery available within 75 miles of our Tampa, Orlando, Jacksonville, Miami, and Lakeland yards; minimum 24 pallets; small-order pricing applies on freight.
Manufacturing customers running JIT (just-in-time) lines require pallets delivered to specific dock doors on 2-hour windows; we offer GPS-tracked delivery with 15-minute arrival ETAs.
ISPM-15 export documentation included on every applicable load at no additional cost; some competitors charge $50-150 per load for the certificate; we don't.
Lumber sourcing prioritizes regional Southeast US hardwood mills (FL, AL, GA, MS); reduces transport carbon vs Pacific Northwest stock; supports regional logging economies.