B2B new pallet supply for Columbus operations.
USP delivers new pallet supply to Columbus operations: Brand-new GMA 48x40 stringer or block pallets, ASTM D1185 rated, ISPM-15 export ready. Each Columbus order ships from regional dispatch with sub-2-hour quote response and audit-ready documentation per FSMA, ISPM-15, GDP, OSHA, and EPA frameworks.
| Tier | Volume | Discount |
|---|---|---|
| Spot | 50-499 units | Base |
| Tier 1 | 500-999 | 3-5% off |
| Tier 2 | 1,000-4,999 | 5-10% off |
| Tier 3 | 5,000-9,999 | 10-15% off |
| Standing-Order | 10,000+/yr | 15-25% off |
Net-30 credit terms standard after the first 1-3 prepaid or COD loads while credit is being established. Submit a credit application with three trade references; approval typically processes within 48 hours. Volume accounts can negotiate net-45 or net-60.
Yes, with ISPM-15 heat-treated pallets carrying IPPC stamps and full ISPM-15 documentation. Required for international shipments to all WTO member countries. Common for Columbus customers with port access via Columbus's major export gateways.
Yes. We buy back used pallets from Columbus collectors, recyclers, and warehouses - 250-pallet minimum per load, single-size only (no mixed-size loads). Fast ACH payment, typically same-day or net-7 depending on volume. Pickup arranged on standard outbound delivery routes.
50 pallets per order minimum on buy-side. Sell-side (buyback) minimum is 250 pallets per single-size load. Volume tiers kick in automatically as cumulative monthly volume increases - 500+/week accounts qualify for standing-order programs with reserved delivery slots.
Yes. Backhaul logistics are coordinated on outbound delivery routes - empty or non-spec pallets get picked up on the return leg of new pallet deliveries. Per-pallet freight cost on the backhaul approaches zero for accounts running both new-pallet purchase + buyback simultaneously.
Sub-2-hour response.
All pallets stamped IPPC HT for ISPM-15 export compliance to 180+ countries; documentation includes treatment temperature logs and the registered facility number.
Florida DOACS regulations require ISPM-15 documentation on every export load originating from PortMiami, Port Everglades, JAXPORT, and Port Tampa Bay; we maintain on-call certification staff at all four ports.
Florida Department of Transportation hauler permits restrict pallet loads above 80,000 lb GVW to specific corridors; our DOT-permitted carriers handle the routing.
Block pallets (four-way entry) use nine 4-inch hardwood blocks with continuous-face top deck; ideal for ASRS (automated storage and retrieval) and AGV (automated guided vehicle) operations where stringer interruptions cause read-failures.
Custom 42x42 pallet builds use 7/8 inch deck boards for telecommunications-equipment loads; nail-pattern density doubled to handle 5,000 lb static load; runner spacing optimized for 4,000 lb-capacity narrow-aisle reach trucks.
Same-day delivery available within 75 miles of our Tampa, Orlando, Jacksonville, Miami, and Lakeland yards; minimum 24 pallets; small-order pricing applies on freight.
Marine industry suppliers (Fort Lauderdale, Stuart, Miami) use exterior-rated pallets that resist saltwater corrosion; treated lumber stock available; preferred for boat-component freight to Bahamas and Caribbean.
Net 30 terms standard for established customers with credit approval; Net 15 or COD for first three orders; credit card and ACH accepted for spot orders.
Our Lakeland and Jacksonville recycling streams process 200,000+ pallets per year; broken stock is repaired or chipped for mulch (sold separately); zero-landfill goal targeted for 2027.